FOSHAN NORDICA ELECTRICAL APPLIANCES CO., LTD

　　Nowadays,many factories and enterprises should be familiar with industrial dehumidifiers.Industrial dehumidifiers have been used in many occasions and have been recognized.

　　There are many companies that use industrial dehumidifiers here. NORDICA is a Manufacturer and Manufacturer for Industrial Dehumidifiers in Foshan, Guangdong, China. However, how many people know the essentials of using a machine?

　　01 Determine the ambient temperature

　　The recommended operating range of conventional industrial dehumidifiers is 5~40°C.When the ambient temperature is lower than 5°C,the water droplets attached to the surface of the evaporator will frost and weaken the dehumidification effect of the machine;if the ambient temperature exceeds 40°C,the pressure in the system will increase,and the compressor will be overloaded,which will cause the compressor motor to dehumidify.damage.

　　02 Use after standing still

　　During the transportation and placement of industrial dehumidifiers,there will inevitably be vibrations,tilting and other movements,which will cause the refrigerant in the compressor to be displaced.If it is turned on and used immediately,the refrigerant will be poured backwards,and the compressor will be easily burned out during idling.Therefore,it is necessary to let the industrial dehumidifier stand still for 2 to 4 hours to allow the refrigerant in the compressor to return to its place before turning it on for use.

　　03 Placement selection

　　The industrial dehumidifier should be placed in a place with good air circulation and flat ground,so that the humid air can be quickly drawn into the dehumidifier,and the dry air can be quickly circulated to all corners of the factory to achieve better dehumidification effect.

　　On the other hand,the machine should not be close to the wall,because after a long time of operation,the temperature of the machine will continue to rise;the air inlet of the machine should be kept away from the goods,and it is strictly forbidden to place goods on the top of the machine to avoid blockage and affect the circulation effect.

　　04 Suggestions for power on

　　After the industrial dehumidifier is turned on,try to keep it in the power-on standby state,and do not turn it on frequently.BAIOO industrial dehumidifier comes with a temperature and humidity monitoring sensor,which can accurately and efficiently control temperature and humidity.After the machine is turned on,it does not need frequent manual opening and closing,which can reduce the damage to the machine performance and reduce the waste of electric energy.

　　If you do not use the machine for a long time,you can cut off the power supply;after a power outage,it is recommended to turn off the power supply immediately to prevent a sudden power call.The large current will cause a sudden impact on the equipment and damage the dehumidifier.Therefore,it is best to install an air switch when wiring the machine,so that the machine can be used when the power is off.

　　05 Machine maintenance and cleaning

　　If the dehumidifier is used for a long time,the air inlet is easy to be blocked,which will cause the air intake to be unsmooth and directly affect the dehumidification effect.Therefore,it is necessary to regularly clean the air inlet,air outlet and filter screen of the dehumidifier.

　　When cleaning the filter,make sure that the power of the machine has been unplugged.Remove the filter,remove the dust with clean water,dry it in a cool place,and then put it back to the original place.Do not use corrosive chemicals to clean or expose to direct sunlight to prevent the filter from being damaged or deformed.

　　If you need to clean the appearance of the machine,you can use a soft cloth with a soft detergent to wipe it,and do not rinse it directly with water.